How to fill out a work order for interior equipment (Interior WO)
1. In order to fill out a work order for interior equipment (Interior WO), go to the module "Workshop".
2. Then go to the tab "StripDown"
3. Then go to the tab "Interior WO".
4. Select the required WO for interior equipment from the list, click on the corresponding line. Note: If necessary, use the search. Enter the WO number for the interior equipment that you want to fill out in the field _"WO"__. Press the "Enter" button on your keyboard.
5. Check that the required interior WO order is displayed in the window "Interior WO Strip Down Report Editor/Defect Rectification".
6. Enter the text of the finding found during work in the field "Findings".
7. Select from the dropdown list the person who worked with the defect in the field "Employee №".
8. Enter the man-hours spent in hours in the field "Hour".
9. Enter the man-hours spent in minutes in the field "Minute".
10. Click on the button "Add" to add finding data to the program.
11. Click on the button "Yes" to confirm adding data to the program.
12. Make sure that the finding is displayed in the window "Findings".
Note: If you need to add the found findings, repeat steps 6 to 12 of this instruction.
13. From the dropdown list, select the part number of the consumable used in the field "PN". Note: The description of the consumable used will be entered automatically in the field "Description".
14. If the applied used material is additional to this finding, tick the box "Additional".
15. If necessary, enter the batch number from the certificate for consumables in the field "Batch No.".
16. If necessary, enter the number of item of consumable in the field "Item".
17. Enter the quantity of consumables in the field "Qty".
18. Select the consumable unit of measurement from the dropdown list in the field "Unit".
19. If necessary, enter the cost of consumables in the field "Price".
20. Click on the button "Add" to add consumable data to the program.
21. Click on the button "Yes" to confirm adding the consumable data to the program.
22. Verify that the consumable is displayed in the window "Findings".
Note: If you need to add a used consumable, repeat steps 13 through 22 of this instruction.